Elevate Your Roofing Experience with SIP Roofs
Innovative, durable, and energy-efficient solutions for all roofing projects.
Performance in SIP Roofs
Fire, Wind, Structural, Speed
OSB, Steel and Magnesium
We have the Options Covered
Advanced Roofing Solutions
Polyurethane Foam Cores, Expanded Polystyrene Foam Cores
Steel Skin Panels
Galvanized steel panels with polyurethane core for unparalleled strength and insulation.
The Steel Skin Panels
Our galvanized steel skin panel system is the most tested steel panel on the market. The GX panel has 26-gauge steel on both sides, the foam used in this system is a polyurethane foam core wand is a Honeywell/ Dow combination. The panel is two (2) feet wide and can be produced from 8 feet long up to 50 feet long.
GX panel comes in 3 inches, 4 inches and 5 inches R-24 R-28 and R-40 respectfully.
The GX Roof panels are Dade County Florida Approved and are rated at 155 MPH Wind Load
Polyurethane Foam is a Class 1 Type A Fire Rated Foam
The GX Panels is 1 Hour Fire Rating as an assembly, with 1-layer of 1/2 typical drywall
OSB/PUR/OSB Panels
An Industry Standard
The OSB polyurethane foam core panels are manufactured in sizes of (4 ) four feet x 8 feet and up to 24 feet long.
Panels are manufactured in 4.5 inches and 6.5 inches R-28 and R-40 respectfully.
Panels are manufactured with Class 1 Type A Fire Rated Foam
Panels are manufactured with 7/16 APA OSB on both sides
All doors and windows/opening are pre-framed per design
All electrical boxes are foamed in place per plan
All electrical conduits are foamed in place per plan.
Wind-load is 130 mph
All testing documents and span charts available upon request
Blank panels are also available for some applications.
All accessories for typical install included
OSB/EPS/OSB Panels
The OSB polystyrene panels types are available in EPS and XPS foams.
Panels are manufactured in 3 inches to 12 inches.
R-values are calculated at 3.6 R per sq inch respectfully.
All doors and windows/opening are pre-framed per design
All electrical chases are pre-cut in foam. (Typical at 16 inches from floor and 42 inches from floor)
All electrical boxes are installed on site by contractors or others.
EPS and XPS panels can be prefabbed per plan with all doors and windows framed per plan.
Wind-load is 180 mph
All testing documents and span charts available upon request
Blank panels are also available for some applications.
All accessories for typical install included
MAG/EPS/MAG Panels
The Magnesium oxide board is manufactured using polystyrene EPS and XPS foams.
Magnesium boards have 1- and 2-hour fire rating or your spec)
Panels are manufactured in 3 inches to 12 inches.
R-values are calculated at 3.6 R per sq inch respectfully.
All doors and windows/opening are pre-framed per design
All electrical chases are pre-cut in foam. (Typical at 16 inches from floor and 42 inches from floor)
All electrical boxes are installed on site by contractors or others.
EPS and XPS panels can be prefabbed per plan with all doors and windows framed per plan.
Wind-load is 180 mph
All testing documents and span charts available upon request
Blank panels are also available for some applications.(Please ask about this)
Magnesium Oxide board (Mag Board) had not expansion or contraction under water for 300 plus hours.
All accessories included for typical install
Environmental Focus
Environmentally conscious practices and cost-effective solutions for sustainable roofing.
Offering all types of environmental SIP solutions.
Create and design using polyurethane foam cores.
Design with expanded polystyrene foam cores. We can also provide you XPS products too meet your needs.
Max our your sustainability chart by using magnesium oxide board.
Use it on the roof, use it on the walls.
Use it on the floor
You can use it inside as a finished drywall type product.
You can use it on the exterior as a finished product.
Mag board has had water testing complete and showed no expansion or contraction for over 300 hours.
We have over 20,000 sheets in stock most of the time
Ask is for more information about our Fire Rated Mag Board Products
Expert Engineering
50 State engineering stamps with support and fully tested panels for reliable roofing solutions.
We can engineering just the roof sections or the complete design using SIP construction.
Did you know Steel panels are used as a stand alone structural component up to 14 feet without any other structural support.
Did you know is some cases you can span as much as 20 feet of roof sections.
Cover 100 sq feet with dropping one panel in place.
From R-16 to R-52 we have a SIP panel that will deliver performance on the roof.
Decrease your cost in residential commercial and industrial designs.
We offer consolation on projects nationwide.
I hour of SIP knowledge can save you thousands of dollars.
Let’s Talk. Office: 770 776 6198
Sustainable Roofing Products
Revolutionizing Roofing Practices
Why Choose SIP Roofs?
Advanced Technology
Utilization of cutting-edge materials and techniques for unmatched roofing solutions.
We know SIP technology, we know how to make it work, we’re completive. We have excellent service.
Sustainable Practices
Commitment to environmental consciousness and cost-effective sustainable roofing options.
For over 22 years we have delivered SIP products to the AEC industry.
Professional Support
Expertly engineered solutions with efficient installation support for peace of mind.
You can count on us to provide you with the knowledge, service and products for you construction projects.
Contact Us About Your Project
Frequently Asked Questions
Explore common queries about our innovative roofing products and services.
Yes, all our panels undergo rigorous testing and comply with safety regulations.
We have Dade County Florida Approved products.
Some of our products have more testing that any SIP panels on the market.
Absolutely, we offer a range of panel sizes to meet your specific project requirements.
We can provide you with a complete prefabbed kit to make the project go smoothly.
We have kits with all doors, windows and opening pre-cut and ready to install
Yes, we offer professional installation guidance and support for seamless panel setup.
We also have install crews in some areas.
We can provide full support for contractors, developers, homeowners, or any project at any location.
Yes, our roofing solutions are designed to be environmentally conscious and sustainable.
As ECO friendly as it gets. We meet most every requirement when it comes to being substainable.
We’ve been Transforming Roofing Solutions for over 22 years. Let’s get started with yours today
Contact us now to discover the roofing solutions we offer.